Appliance Prep for Storms and Power Outages

Before a storm, set the refrigerator and freezer colder, keep doors closed during an outage and use surge protection; afterward, wait a few minutes before restarting appliances and check for water damage or burning smells.

Before the storm

Turn the refrigerator and freezer to a colder setting, fill spare space with water bottles or ice and unplug sensitive appliances if a surge is likely. Consider surge protectors rated for appliances.

During an outage

Keep doors closed. A closed refrigerator holds temperature for roughly four hours, and a full freezer for about two days if it stays closed. Do not run a generator indoors.

Restarting appliances

Wait a few minutes after power returns to avoid damaging compressors, then plug items back in one at a time.

Check for damage

• Burning smell or tripped breakers.
• Refrigerator not cooling after restart. See refrigerator not cooling.
• Control boards that will not respond.

Food safety

Discard perishables that were above 40 degrees Fahrenheit for more than two hours.

Frequently asked questions

Can a surge kill a control board?

Yes.

Should I turn off the breaker?

Turning off major appliances before a surge can help.

Is the freezer safe?

If ice crystals remain, food can generally be refrozen.

Do whole-house surge protectors help?

They can add protection.

When should I call for service?

If appliances will not restart.

Appliance-by-Appliance Notes

Preventive Maintenance Calendar

Every few months, take ten minutes to vacuum coils, clean filters and lint traps, inspect hoses and gaskets, and run cleaning cycles. Once a year, schedule a vent cleaning and a visual check of power cords and water lines. Preventive care costs far less than emergency repairs and keeps warranties valid.

How to Describe a Problem to a Technician

Good details shorten the visit. Mention when the problem started, whether it happens every cycle or randomly, any sounds, smells, or error codes, and anything you already tried. Photos of the model label and the symptom are very helpful. The more precisely you describe the issue, the more likely the technician arrives with the right part.

Renters, Landlords and Property Managers

Rental properties need quick, documented service to keep tenants comfortable and protect the unit. Landlords can approve repairs by phone, receive a written invoice, and schedule access with the tenant. Tenants should report problems promptly and avoid DIY electrical or gas work, which can create liability.

What Our Diagnostic Visit Includes

Every visit starts with a full inspection, test of the suspect components, and a flat-rate quote before any work begins. The diagnostic fee is waived when you approve the repair, parts and labor are covered by a 90-day warranty, and same-day appointments are available when scheduled. You approve the price first, so there are no surprises.

How a Dryer Heats and Moves Air

A dryer pulls room air across a gas burner or electric heating element, tumbles clothes in the drum, and pushes the moist air out through the vent. Thermal fuses, high-limit thermostats, a cycling thermostat, a moisture sensor, and a belt-driven motor control the process. When a dryer runs but does not dry, the cause is nearly always airflow, heat, or both. Checking airflow first costs nothing and often solves the problem.

Power Surges, Storms and Electrical Protection

Georgia thunderstorms and utility switching can send voltage spikes through household wiring. Control boards and sensors are the first parts to suffer. Plug major appliances into properly grounded outlets, consider a whole-home surge protector, and unplug sensitive units during severe lightning. If an appliance dies right after a storm, tell the technician, because it points straight toward the control board.

Bake and Broil Element Failures

A glowing bake element that blisters, cracks, or goes dark means the element has failed. Elements are simple to test with a meter and are a common, affordable repair. Turn off the breaker before touching any wiring. If both bake and broil are dead, the problem is more likely a control board, a thermal fuse, or the selector switch.

How Ovens and Ranges Heat

Electric ovens use a bake element and a broil element controlled by a temperature sensor and a control board. Gas ovens use an igniter and safety valve to light the burner. Stove top burners use infinite switches or a spark module. When food bakes unevenly, the oven takes a long time to preheat, or a burner will not light, the problem is usually a sensor, igniter, element, or switch rather than the whole range.

How a Dishwasher Cleans

A dishwasher fills with water, heats it, sprays it from rotating arms, drains it, and often dries with a heating element or a condensation process. An inlet valve, circulation pump, drain pump, heating element, float switch, and control board manage each step. If dishes come out dirty, wet, or the cycle never starts, one of those systems is the likely culprit.

Parts Availability and OEM Quality

Technicians who stock common OEM parts can often finish a repair in a single visit. Aftermarket parts vary in quality, and some void warranties. Ask whether the part is OEM, and keep the old part for your records. Model and serial numbers on the appliance label let the technician order the exact match.

Spray Arms, Filters and Hard Water

Clogged spray arm holes and dirty filters are the top reasons for gritty or cloudy dishes. Remove and rinse the lower filter monthly, and clear the spray arm nozzles with a toothpick. Metro Atlanta water is relatively soft, but mineral film can still build up in some homes, and a rinse aid helps prevent spots and film.

Serving Clayton, Henry and Fayette Counties

Service Lead Heroes technicians cover Jonesboro, Riverdale, Morrow, Forest Park, Lake City, Lovejoy, and nearby cities in Clayton, Henry, and Fayette Counties. Call (470) 847-9076 to schedule, and describe the brand, model, and symptoms so we can arrive prepared with likely parts.

Energy Efficiency and Utility Savings

A well-maintained appliance uses less electricity and water. Dirty coils, clogged vents, worn gaskets, and weak heating elements all force the unit to run longer. Fixing them can reduce utility bills noticeably through the summer. Keep appliances level, avoid overloading, and use energy-saving cycles where they make sense.

How a Microwave Heats

A magnetron produces microwave energy, a waveguide directs it into the cavity, and a turntable and stirrer spread it around. A high-voltage transformer, capacitor, and diode supply power to the magnetron. Because the high-voltage parts store dangerous charge even when unplugged, microwave repair belongs to trained technicians.

Safety Habits Every Household Should Follow

Keep the area around appliances clear of cardboard, cleaning chemicals, and clutter. Never defeat a safety switch, and replace damaged cords immediately. Test smoke and carbon monoxide detectors, especially if you have gas appliances. Teach everyone in the home where the gas shut-off and the electrical panel are located.

No Heat but the Light Works

If the display, light, and turntable work but food stays cold, the high-voltage circuit is failing. Common culprits are the diode, capacitor, transformer, or magnetron. Do not open the case. A technician can test components safely and tell you whether a repair makes sense for the age of the unit.

Why Metro Atlanta Homes Face Unique Appliance Wear

Clayton County and the surrounding Georgia suburbs share long humid summers, heavy pollen seasons, and frequent thunderstorms. Heat and humidity increase the load on refrigerators and dryers, while power surges from storms shorten the life of control boards. Surge protection, good ventilation, and regular cleaning are simple steps that protect every appliance in the home.

How a Refrigerator Actually Keeps Food Cold

A refrigerator moves heat rather than making cold. The compressor pressurizes refrigerant, the condenser coils release that heat into your kitchen, and the evaporator coil absorbs heat from the food compartment. A fan pushes the chilled air around, and a thermostat or control board decides when the cycle starts and stops. When any one of those parts weakens, the symptoms look similar: warm shelves, frost, noise, or a unit that runs constantly. Knowing the cycle helps you describe the problem clearly to a technician and avoid paying for a part that was never the cause.

Typical Repair Cost Ranges

These national ranges help you set expectations before you call. Your exact quote depends on the model, the failed part, and labor time, and it is always given upfront.

Frequently Asked Questions

Do you offer same-day appliance service?

Yes. Same-day diagnostics are available when scheduled, and our technicians carry common OEM parts so many repairs finish in one visit. Call (470) 847-9076 to reserve a window.

What should I have ready before the technician arrives?

Locate the model and serial number label, write down any error codes, and note when the problem began. Clear a path to the appliance so the technician can work safely.

Is the repair covered by a warranty?

Every repair includes a 90-day parts and labor warranty. If the same problem returns within that period, we come back and make it right.

How much does appliance repair cost in Georgia?

Costs vary by part and labor. The diagnostic visit usually runs $50 to $150 and is waived with any repair. You receive an upfront flat-rate quote before work begins, so you decide with the full price in hand.